Audio stereo amplifier 2x15W 12V PAM8610

Overvirew

PAM8610 module is an amplifier audio stereo with 10W output power/channel into an 8Ω speaker load and 12V power supply. It offers low THD+N, high-quality sound reproduction and high efficiency (90%) at low cost. It's suitable for your DIY projects when you need a light and portable audio amplifier.

Specifications

- Size: Approx. 40 ×40 ×22 mm
- Volume control potentiometer shaft diameter: Approx. 6mm
- Output power: 10W+10W, 8Ω
- Frequency response: 20Hz to 50KHz
- Amplifier class: D
- Operating voltage: 7.5 - 15V DC
- Recommended supply voltage: 12V
- Quiescent Current: 20mA
- Speaker Load: 4-8 Ohms, 8Ω recommended, screw terminal connectors
- Noise canceling circuit built into the amplifier board
- Screw terminals for easy speaker connection - no soldering needed
- No popping noise when Power on/ off
- Power switch and mute switch connectors and volume control potentiometer
- Short-circuit current protection: under-voltage lockout and over-temperature protection (shuts down at an internal temperature of 140C±15C)

Datasheed

Click here