NTKPAL_8_neopixel_bar
New product
143 Item Items
Warning: Last items in stock!
Availability date:
WS2812 LED bar contains eight controllable RGB LEDs. They can be independently controlled using only two digital pins.
Model: 8 5050 full color LED module
Size: 11 mm x 15 mm
Chip: WS2811 (built-in LED)
LED: 5050 Package RGB full-color
Voltage: 5 V
Note: The picture above shows LEDs 4 to 7VDC feed on pins and GND, and communication via DIN and DOUT follows: the rectangular pin DIN receives a signal from the Arduino. You can insert multiple LED modules by connecting DOUT to DIN terminal of the next module.
The LED bar contains RBG LEDs inside: red, blue, green. The first 8-bit green LEDs will command the 8 LED RBG, next 8 bits will command the red LEDs, and the last 8 bytes sent before the reset signal will control the blue LEDs. The easiest way to use LED strip is to use a library that already has implemented the functions for generating the necessary signals.
To understand how to interpret the data, track image: a signal logical one for us and logical value 0 0.35 for a period of 0.8 us will be interpreted as a bit with value 0. A signal with a logical one for us 0.7 and 0.6 logical 0 for us will be considered a bit of value 1. To control all the LEDs send 24-bit and a reset signal - a signal LOW for a period.
No customer reviews for the moment.
43,38 lei
0,57 lei -20% 0,71 lei
124,20 lei
3,21 lei 4,82 lei
103,35 lei
99,76 lei
4,28 lei
18,30 lei 25,37 lei
115,52 lei
14,46 lei
31,81 lei
93,98 lei
39,04 lei
48,44 lei
15,33 lei
1,71 lei
102,51 lei
6,27 lei
4,98 lei
0,43 lei
103,35 lei
330,72 lei
585,78 lei 644,69 lei
170,99 lei 197,76 lei
54,82 lei 71,96 lei
82,73 lei 136,28 lei
552,15 lei 600,35 lei
608,65 lei 683,62 lei
717,07 lei 797,40 lei
871,10 lei